Barfell High Temperature Hot Water Hose with Crimped Brass Fittings 10mm

Inner Diameter: 10 mm
Outter Diameter: 17 mm
Maximum Working Pressure: 2.1 MPA (300 PSI)
Minimum Burst Pressure: 1200 PSI / 8.4 MPa
Construction: PVC With polymer mesh reinforcement, black inner wall, matt red outer wall.
Temperature Range: -5 ̊C to 90 ̊C Note: 12.5mm Biodiesel hose tested to 4.8Mpa burst at 95 ̊C when fitted with crimped one piece fittings.

• A new specialty hose with extremely high resistance to many chemicals including biodiesel and other hydrocarbons and solvents.
• BARFELL Multipurpose hose suitable for higher temperatures where general purpose rubber hoses have been traditionally used. An excellent hot was hose.
• MADE IN AUSTRALIA

Application: Factories, workshops, restaurants, quarries, mines, construction sites, farming projects and concrete handling etc. where a quality multi purpose hose offers a one-off solution to all your needs. The hose is non-conductive construction which is resistant to air, water, petroleum-based products, many chemicals, solvents and sprays.

• 1 x 10mm barb brass nut and tail (crimped on the hose)
• Nut size suitable for both 3/4" and 1" tap sizes
• 1 x 10mm barb to 1/2” Bsp brass director (crimped on the hose)